close

How to Easily Repair the Samsung Galaxy S9 + Green Screen

Daftar Isi [Tutup]

    An Easy Way to Overcome the Green Screen on the Samsung Galaxy S9 +

    Samsung Galaxy S9 + is considered to be one of the best featured cellphone models released last year due to its many superior features. This device is made of Aluminum frame with Corning Gorilla Glass in the front piece & beldapatg. Displays a large 6.2-inch Super AMOLED screen while under the hood is a Snapdragon 845 processor paired with 6GB of RAM.

    Even though this is a solid performance device, there are some cases when certain problems can occur that we can discuss today. in our discussion we can review the discourse of solving the green screen problem of the Samsung Galaxy S9 +.

    How to Easily Repair the Samsung Galaxy S9 + Green Screen

    Although this seems to be caused by a damaged hardware component, there are still several steps to solve the problem that you can do to investigate whether there is a software error that has caused the Samsung Galaxy S9 + screen to turn green. Below are the steps you need to do to correct the problem.

    1. Perform a Soft Reset

    The first thing you have to do in this case is that soft reset is usually done when the phone becomes unresponsive.

    Press & hold the Power & Volume button down to 45 seconds.

    Wait when the device restarts.

    After the phone restarts, check whether the screen is now functioning.

    2. Check in Safe Mode

    It may be that one of the applications you download causes this screen problem to show nothing. To investigate whether this is the problem, you must start the phone in Safe Mode because only pre-installed applications are allowed to run in this mode.

    Turn off the phone.

    Press & hold the Power button past the model name screen that appears on the screen.

    When SAMSUNG appears on the screen, release the Power button.

    As soon as you release the Power button, press & hold the Volume button down.

    Continue holding the Volume button down until the device has finished restarting.

    When conducive mode appears in the lower left corner of the screen, release the Volume down button.

    As soon as the screen works in this mode, the problem is most likely caused by the application you downloaded. Find out what this application is & uninstall it.

    3. Clean the Cache Partition

    Phone system cache data is used to speed up the channel to your mobile application. Terka & g this data can be damaged which makes the problems that occur on the device. To investigate whether corrupted cache data is causing problems, you need to delete the phone cache partition from recovery mode.

    Turn off the phone.

    Press & hold the Volume Up & Bixby buttons, then press & hold the Power button.

    When the Android logo is displayed, release all buttons ('Installing a system update' can appear around 30-60 seconds before displaying the Android system recovery options).

    Press the Volume button down to highlight "Wipe cahce partition."

    Press the Power button to select.

    Press the Volume button down to highlight "yes" & press the Power button to select.

    When the cache partition is deleted, "Reboot system now" is highlighted.

    Press the Power button to restart the device.

    Check whether the problem still occurs.


    4. Perform a Factory Reset

    One solution to the last problem you should consider is a factory reset. This can return your cellphone back to its original factory condition. Be sure to check your cell phone data before you reset the reset button because it can be deleted in the process.

    Turn off the phone.

    Press & hold the Volume Up & Bixby buttons, then press & hold the Power button.

    When the green Android logo is displayed, release all keys ('Installing a system update' can appear around 30-60 seconds before displaying the Android system recovery options).

    Press the Volume down button several times to highlight ipe Wipe data / factory reset '.

    Press the Power button to select.

    Press the Volume down button to select the presentation ‘Yes - delete all user data '.

    Press the Power button to specify & start the master reset.

    When the master reset is complete, 'Reboot system now' is highlighted.

    Press the Power button to restart the device.


    If the screen is still green even after scanning the troubleshooting steps for the problems listed above, this is most likely caused by a damaged hardware component, maybe a display or controller. The best thing to do when this is repairing a telephone is at a service center.

    ~ Samsung Galaxy ~ Easy Way-To Overcome-screen-green-on-samsung